hdvtwinforums.com - HD Forum - Harley Davidson Vtwin Forum Provides Motorcycle Tech Tips, Reviews, Parts, Riding Across USA with Google Map


Welcome Guest!

Welcome and thanks for visiting Harley Davidson and V-twin Forums, a dedicated site for all Harley Davidson motorcycle enthusiastic riders,

We are working very hard to bring this site to all riders, who love to ride the world most famous motorcycles:  Harley Davidson!

You will enjoy many selected features that will give you all bells and whistles as in any commercial sites.
Sign up, and upload your photos to your own photo album, and you will see new stunning, high quality photos that re-digitized by our photo album software.  We rule our forum based on our U.S. constitution!

In the meantime, you are currently viewing our forum in guest mode, which gives you the limited access to many features, such as view attached image, post reply, upload photo to your own photo album, create a poll, send private message (PM) to other members, and many more. Registration is free, and it takes only a minute.
You registration is really appreciated!
Please login, or click here to register.
« previous next »
Pages: [1]   Go Down

Author Topic: Remove and Install Exhaust System Basic Information - Touring Models  (Read 612 times)

0 Members and 2 Guests are viewing this topic.

Offline HDTechGuy

  • Starter
  • *
  • Posts: 18
  • Roaming America Rider
Remove and Install Exhaust System Basic Information - Touring Models
« on: March 28, 2011, 03:44:57 AM »
Tools:
  • Torque wrench - setting min. 8 in/lbs - 120 in/lbs
  • Flat head screw-driver
  • Variable size wrenches
  • WD-40
  • Medium size Exhaust expander (Harbor Freight).
Parts:
Remove
Steps:
  • Put your bike on jiffy stand
  • Remove both saddle bags
  • Un-screw all the worm clamps (20), and remove ALL the heat shields (19, 22) on the right side
  • Remove right side muffler (24). Use WD40 if needed.
  • Loosen, and remove just one bolt (2) that hold the left muffler to the frame; just let it hang loose with one bolt.
  • Remove the flange bolt (6) to open the exhaust support clamp (7).  Loosen the clamp (4) at the end of the cross-over pipe to disengage the left muffler from the exhaust.  Use WD40 if needed.
  • Disconnect both O2 sensor connectors (if applied)
  • Remove all flange nuts (17)
  • Loosen the flange locknut (21) at the exhaust bracket
  • Remove the exhaust. Use WD40 if needed.
Re-install
It should be required attention to the step orders in this procedure, or you may have a leak, or misalignment.
  • to be continued.
Logged
Pages: [1]   Go Up
« previous next »
 

* Our Supporters

Where are you?